Araştırma Makalesi
BibTex RIS Kaynak Göster

Yıl 2022, , 162 - 177, 30.12.2022

Femi Owoeye , Adinife Azodo , Williams Joshua , James Utume

https://doi.org/10.29002/asujse.1140113

Öz

Kaynakça

  • [1] J.A. Abah, G.T. Atondo, J.T. Kwaghwa. The Ethnomathematics of Indigenous Burnt Bricks Production in the Benue Valley. VillageMath Educational Review, 1:1 (2020) 11-25.
  • [2] I. Onyegiri, I.B. Ugochukwu. Traditional Building Materials as a Sustainable Resource and Material for Low-Cost Housing in Nigeria: Advantages, Challenges and the Way Forward. International Journal of Research in Chemical, Metallurgical and Civil Engineering, 3:2 (2016) 247-252.
  • [3] A.M. Iorakaa. The use of locally produced burnt bricks for low cost housing in Nigeria: the experience in Vandeikya, Benue State. The Department of Architecture, School of Environmental Sciences, Federal University of Technology, Yola. (2008).
  • [4] B.C. Onuoha. Factors militating against the global competitiveness of manufacturing firms in Nigeria. American international Journal of Contemporary Research, 3:4 (2013) 54-63.
  • [5] S.O. Olaitan, C.E. Nwachukwu, G. Igbo, G.A. Onyemachi, AO. Ekong. Curriculum Development and Management Vocational Technical Education (Cape Publishers International Limited, Onitsha, 1999).
  • [6] S.K. Duggal. Building Materials. (New Age International Publishers, New Delhi, 2012).
  • [7] Technical notes on brick construction, Brick Industry Association (BIA) http://www.gobrick.com/. (2009).
  • [8] J.O. Akinyele, O.T. Olateju, O.K. Oikelome. Rice husk as filler in the production of bricks using Gboko clay. Nigerian Journal of Technology, 34:4 (2015) 672-678.
  • [9] T.O. Jegele, A. Adanikin. Assessment of the Strength of Conventionally Produced Sandcrete Blocks and Burnt Bricks. IOSR Journal of Mechanical and Civil Engineering, 15:2 (2018) 24-30.
  • [10] B.K. Baiden, K. Agyekum, J.K. Ofori-Kuragu. Perceptions on barriers to the use of burnt clay bricks for housing construction. Journal of Construction Engineering, 502961 (2014).
  • [11] S. Karaman, H. Gunal, S. Ersahin. Assessment of clay bricks compressive strength using quantitative values of colour components. Construction and Building Materials, 20:5 (2006) 348-354.
  • [12] A. Beamish, W. Donovan. Village-level brickmaking. (Friedr. Vieweg & Sohn., 1989).
  • [13] D.S. Matawal. Linking academia to industry: a case study of the building and construction industry. Director-General/Chief Executive Officer Nigerian Building and Road Research Institute, NBRRI. http://www.notap.gov.ng, (2011).
  • [14] F.V. Riza, I.A. Rahman, A.M.A. Zaidi. Preliminary study of compressed stabilized earth brick (CSEB). Australian Journal of Basic and Applied Sciences, 5:9 (2011) 6-12.
  • [15] F. Adogla, P.P.K. Yalley, M. Arkoh. Improving Compressed Laterite Bricks using Powdered Egg shells. The International Journal of Engineering and Sciences, 5:4 (2016) 65-70.
  • [16] W.D. Adzraku, P.P. Yalley, T.J. Akubah,S.O. Bonney. Prospects for sustainable housing in Northern Ghana with the use of local walling materials. Journal of Economics and Sustainable Development, 7:20 (2016) 5-13.
  • [17] Y. Mahgoub. Sustainable architecture in the United Arab Emirates: past and present. In Proceedings of the CAA-IIA International Conference on Urbanisation and Housing, (1997) 2-5.
  • [18] DEST. Employability skills from framework to practice, an introductory guide for trainers and assessors. A report by the Australian Chamber of Commerce and Industry and the Business Council of Australia for the Department of Education, Science and Training, Canberra, (2006).
  • [19] E. Silva. Measuring skills for 21st-century learning. Phi Delta Kappan, 90:9 (2009) 630-634.
  • [20] P.B. Peele, Y. Xu, A. Colombi. Medical care and lost work day costs in musculoskeletal disorders: older versus younger workers. In International Congress Series, 1280 (2005) 214-218.
  • [21] O. Okunribido, T. Wynn. Ageing and work-related musculoskeletal disorders: A review of the recent literature. Health and Safety Executive Research Report RR799. (Health and Safety Executive, Buxton, 2010).
  • [22] E.J. Ibanga, A.D. Ahmed. Influence of particle size and firing temperature on burnt properties of rice/clay mix. Pacific Journal of Science and Technology, 8:2 (2007) 267-271.
  • [23] F. Tjiptono, G. Chandra. Service, quality & satisfaction. (Andi, Yogyakarta, 2011).
  • [24] S.K. Duggal. Building Materials. (New Age International Publishers, New Delhi, 2012).
  • [25] P.B. Crosby. Quality without Tear: The art of hassle-free management (McGraw-Hill, New York, 1984) pp. 58-86.
  • [26] J. Brozovsky, J. Zach, Jr.J. Brozovsky. Non-destructive testing of solid brick compression strength in structures. In IV Conferencia Panamericana de END, Buenos Aires, Argentina, (2007).
  • [27] P.F. Drucker. Managing for the future: The 1990s and beyond. (Truman Talley Books/Plume, New York, 1993).
  • [28] A. Mardani, S. Nikoosokhan, M. Moradi, M. Doustar. The relationship between knowledge management and innovation performance. The Journal of High Technology Management Research, 29:1 (2018) 12-26.
  • [29] A.B. Jaffe. Technological opportunity and spillovers of R&D: evidence from firms' patents, profits and market value. American Economic Review, 76 (1987) 984-1001.
  • [30] J.P. Liebeskind. Keeping organizational secrets: Protective institutional mechanisms and their costs. Industrial and Corporate Change, 6:3 (1997) 623-663.
  • [31] J. Purcell, N. Kinnie, S. Hutchinson, B. Rayton, J. Swart. Understanding the People and Performance Link: Unlocking the Black Box, CIPD Publishing, (2003).
  • [32] D.M Tiough. Structural properties of rice husk and sawdust composite bricks. CARD International Journal of Engineering and Emerging Scientific Discovery, 2:2 (2017) 118-145.
  • [33] P. Tamkin. Measuring the Contribution of Skills to Business Performance. Institute for Employment Studies. Mantell Building Falmer Brighton BN19RF UK, (2005).
  • [34] NIS, Nigeria Industrial Standard. Standard for sandcrete blocks. NIS 87: 2004. Approved by Standards Organization of Nigeria, Abuja, Nigeria, (2004).
  • [35] P. Foytong, M. Boonpichetvong, N. Areemit, J. Teerawong. Effect of Brick types on Compressive Strength of Masonry Prisms. International Journal of Technology, 7:7 (2016) 1171-1178.
  • [36] F.T. Owoeye, A.P. Azodo, W.K. Joshua. The Effect of Burnt Clay Brick Production Process on the Compressive Strength and Water Absorption Properties. SNRU Journal of Science and Technology, 13:2 (2021) 63-70.

An Investigation into the Local Production Technology of Burnt Bricks in Nigeria

Yıl 2022, , 162 - 177, 30.12.2022

Femi Owoeye , Adinife Azodo , Williams Joshua , James Utume

https://doi.org/10.29002/asujse.1140113

Öz

The acceptability of fundamental features of burnt clay bricks is a control course obtained during the production process. The applied knowledge and skills in production technology of burnt clay bricks were subjectively evaluated and quantified. Multi-method research approaches were adopted which included questionnaire instruments and experimental analysis. Assessing the source of knowledge and skill, the experience of labour and team capacity showed that most of the participants have been in the burnt brick production business for 6-10 years (37.3%) through the tutelage of their friends (72.9%) and participated in the groups of 4-5 people (25.4%). There was a deficiency in knowledge and skills needed for forming and firing stages for standard quality burnt clay brick but only effective in the extraction and preparation stage but deficient in shaping, drying, building the field kiln and firing the field kiln. The independent-sample t-test showed that the mean of the measured water absorption value of the locally produced burnt clay brick was statistically higher (mean ± SD = 29.51±0.58) than the minimum allowable standard water absorption value (mean ± SD = 20.00±0.0) significant at p = 0.00. A similar observation was made for compressive strength as the measured mean compressive strength value for the locally produced burnt clay brick was 3.98±0.30 N/mm² which was statistically higher than 3.5 N/mm². However, the dimensions of the burnt clay bricks were with the tolerance of approximately 5% for locally produced bricks. Considering the importance of good quality burnt clay bricks in construction local producers need a training.

Anahtar Kelimeler

burnt clay bricks product quality local production drying and compressive strength burnt clay bricks, product quality, local production, drying and compressive strength

Kaynakça

  • [1] J.A. Abah, G.T. Atondo, J.T. Kwaghwa. The Ethnomathematics of Indigenous Burnt Bricks Production in the Benue Valley. VillageMath Educational Review, 1:1 (2020) 11-25.
  • [2] I. Onyegiri, I.B. Ugochukwu. Traditional Building Materials as a Sustainable Resource and Material for Low-Cost Housing in Nigeria: Advantages, Challenges and the Way Forward. International Journal of Research in Chemical, Metallurgical and Civil Engineering, 3:2 (2016) 247-252.
  • [3] A.M. Iorakaa. The use of locally produced burnt bricks for low cost housing in Nigeria: the experience in Vandeikya, Benue State. The Department of Architecture, School of Environmental Sciences, Federal University of Technology, Yola. (2008).
  • [4] B.C. Onuoha. Factors militating against the global competitiveness of manufacturing firms in Nigeria. American international Journal of Contemporary Research, 3:4 (2013) 54-63.
  • [5] S.O. Olaitan, C.E. Nwachukwu, G. Igbo, G.A. Onyemachi, AO. Ekong. Curriculum Development and Management Vocational Technical Education (Cape Publishers International Limited, Onitsha, 1999).
  • [6] S.K. Duggal. Building Materials. (New Age International Publishers, New Delhi, 2012).
  • [7] Technical notes on brick construction, Brick Industry Association (BIA) http://www.gobrick.com/. (2009).
  • [8] J.O. Akinyele, O.T. Olateju, O.K. Oikelome. Rice husk as filler in the production of bricks using Gboko clay. Nigerian Journal of Technology, 34:4 (2015) 672-678.
  • [9] T.O. Jegele, A. Adanikin. Assessment of the Strength of Conventionally Produced Sandcrete Blocks and Burnt Bricks. IOSR Journal of Mechanical and Civil Engineering, 15:2 (2018) 24-30.
  • [10] B.K. Baiden, K. Agyekum, J.K. Ofori-Kuragu. Perceptions on barriers to the use of burnt clay bricks for housing construction. Journal of Construction Engineering, 502961 (2014).
  • [11] S. Karaman, H. Gunal, S. Ersahin. Assessment of clay bricks compressive strength using quantitative values of colour components. Construction and Building Materials, 20:5 (2006) 348-354.
  • [12] A. Beamish, W. Donovan. Village-level brickmaking. (Friedr. Vieweg & Sohn., 1989).
  • [13] D.S. Matawal. Linking academia to industry: a case study of the building and construction industry. Director-General/Chief Executive Officer Nigerian Building and Road Research Institute, NBRRI. http://www.notap.gov.ng, (2011).
  • [14] F.V. Riza, I.A. Rahman, A.M.A. Zaidi. Preliminary study of compressed stabilized earth brick (CSEB). Australian Journal of Basic and Applied Sciences, 5:9 (2011) 6-12.
  • [15] F. Adogla, P.P.K. Yalley, M. Arkoh. Improving Compressed Laterite Bricks using Powdered Egg shells. The International Journal of Engineering and Sciences, 5:4 (2016) 65-70.
  • [16] W.D. Adzraku, P.P. Yalley, T.J. Akubah,S.O. Bonney. Prospects for sustainable housing in Northern Ghana with the use of local walling materials. Journal of Economics and Sustainable Development, 7:20 (2016) 5-13.
  • [17] Y. Mahgoub. Sustainable architecture in the United Arab Emirates: past and present. In Proceedings of the CAA-IIA International Conference on Urbanisation and Housing, (1997) 2-5.
  • [18] DEST. Employability skills from framework to practice, an introductory guide for trainers and assessors. A report by the Australian Chamber of Commerce and Industry and the Business Council of Australia for the Department of Education, Science and Training, Canberra, (2006).
  • [19] E. Silva. Measuring skills for 21st-century learning. Phi Delta Kappan, 90:9 (2009) 630-634.
  • [20] P.B. Peele, Y. Xu, A. Colombi. Medical care and lost work day costs in musculoskeletal disorders: older versus younger workers. In International Congress Series, 1280 (2005) 214-218.
  • [21] O. Okunribido, T. Wynn. Ageing and work-related musculoskeletal disorders: A review of the recent literature. Health and Safety Executive Research Report RR799. (Health and Safety Executive, Buxton, 2010).
  • [22] E.J. Ibanga, A.D. Ahmed. Influence of particle size and firing temperature on burnt properties of rice/clay mix. Pacific Journal of Science and Technology, 8:2 (2007) 267-271.
  • [23] F. Tjiptono, G. Chandra. Service, quality & satisfaction. (Andi, Yogyakarta, 2011).
  • [24] S.K. Duggal. Building Materials. (New Age International Publishers, New Delhi, 2012).
  • [25] P.B. Crosby. Quality without Tear: The art of hassle-free management (McGraw-Hill, New York, 1984) pp. 58-86.
  • [26] J. Brozovsky, J. Zach, Jr.J. Brozovsky. Non-destructive testing of solid brick compression strength in structures. In IV Conferencia Panamericana de END, Buenos Aires, Argentina, (2007).
  • [27] P.F. Drucker. Managing for the future: The 1990s and beyond. (Truman Talley Books/Plume, New York, 1993).
  • [28] A. Mardani, S. Nikoosokhan, M. Moradi, M. Doustar. The relationship between knowledge management and innovation performance. The Journal of High Technology Management Research, 29:1 (2018) 12-26.
  • [29] A.B. Jaffe. Technological opportunity and spillovers of R&D: evidence from firms' patents, profits and market value. American Economic Review, 76 (1987) 984-1001.
  • [30] J.P. Liebeskind. Keeping organizational secrets: Protective institutional mechanisms and their costs. Industrial and Corporate Change, 6:3 (1997) 623-663.
  • [31] J. Purcell, N. Kinnie, S. Hutchinson, B. Rayton, J. Swart. Understanding the People and Performance Link: Unlocking the Black Box, CIPD Publishing, (2003).
  • [32] D.M Tiough. Structural properties of rice husk and sawdust composite bricks. CARD International Journal of Engineering and Emerging Scientific Discovery, 2:2 (2017) 118-145.
  • [33] P. Tamkin. Measuring the Contribution of Skills to Business Performance. Institute for Employment Studies. Mantell Building Falmer Brighton BN19RF UK, (2005).
  • [34] NIS, Nigeria Industrial Standard. Standard for sandcrete blocks. NIS 87: 2004. Approved by Standards Organization of Nigeria, Abuja, Nigeria, (2004).
  • [35] P. Foytong, M. Boonpichetvong, N. Areemit, J. Teerawong. Effect of Brick types on Compressive Strength of Masonry Prisms. International Journal of Technology, 7:7 (2016) 1171-1178.
  • [36] F.T. Owoeye, A.P. Azodo, W.K. Joshua. The Effect of Burnt Clay Brick Production Process on the Compressive Strength and Water Absorption Properties. SNRU Journal of Science and Technology, 13:2 (2021) 63-70.
Toplam 36 adet kaynakça vardır.

Ayrıntılar

Birincil Dil İngilizce
Konular Mühendislik
Bölüm Araştırma Makalesi
Yazarlar

Femi Owoeye 0000-0002-4535-1459

Adinife Azodo 0000-0002-2373-1477

Williams Joshua 0000-0002-5135-8681

James Utume 0000-0002-3105-4576

Yayımlanma Tarihi 30 Aralık 2022
Gönderilme Tarihi 4 Temmuz 2022
Kabul Tarihi 16 Kasım 2022
Yayımlandığı Sayı Yıl 2022

Kaynak Göster

APA Owoeye, F., Azodo, A., Joshua, W., Utume, J. (2022). An Investigation into the Local Production Technology of Burnt Bricks in Nigeria. Aksaray University Journal of Science and Engineering, 6(2), 162-177. https://doi.org/10.29002/asujse.1140113

Aksaray J. Sci. Eng. | e-ISSN: 2587-1277 | Period: Biannually | Founded: 2017 | Publisher: Aksaray University | https://asujse.aksaray.edu.tr



ASUJSE is indexing&Archiving in

crossref-logo-landscape-100.png    scholar_logo_30dp.png          oaliblogo2.jpg   GettyImages_90309427_montage_255x130px.png search-result-logo-horizontal-TEST.jpg

22644 EBSCO


Creative Commons License