Stress Analysis of Different Metal Combinations Under Different Temperatures with Hybrid Joints
Abstract
In this study, the stresses on various bonded
joints which made from different sheet metals were investigated by using finite
element method. The bonded joints planned as double-pin connection joints and
adhesive bonded joints. Six different material combinations were used in
joints. ANSYS finite element software was used for analysis, modeling and
solution. The models were designed as 3D. The stresses which applied
temperature load with tensile load to joints were investigated. As a result of
studies, the compression stresses in the models got high values and reached the
highest values at X-axis direction. Furthermore, there were stress
concentrations around the pin hole. Therefore, it can be easily seen that there
may be bearing damage around stress zone.
Keywords
Kaynakça
- 1. K. Aldaş, F. Şen, Karma bağlantı uygulanmış farklı metal plakalarda meydana gelen gerilmelerin incelenmesi. Makine Teknolojileri Elektronik Dergisi, 8(2) (2011) 1-12.
- 2. M. Jackerle, Finite element analysis and simulation of adhesive bonding, soldering and brazing: A bibliography. Modeling and Simulation in Materials Science and Engineering, 5 (1976-1996) 159-185.
- 3. W.S. Chan and S. Vedhagiri, Analysis of composites bolted-bonded joints used in repairing. Journal of Composite Materials, 35(12) (2001) 1045-1061.
- 4. M.K. Apalak, K. Aldaş and F. Şen, Thermal non-linear stresses in an adhesively bonded and laser-spot welded single-lap joint during laser-metal interaction. Journal of Materials Processing Technology, 142 (2003) 1-19.
- 5. F. Şen, M. Pakdil, O. Sayman and S. Benli, Experimental failure analysis of mechanically fastened joints with clearance in composite laminates under preload. Materials & Design, 29 (2003) 1159-1169.
- 6. F. Şen and K. Aldaş, Sıcaklık değişiminin yapıştırmalı ve pimli alüminyum plakalardaki gerilmeler üzerine etkisi. TUBAV Bilim Dergisi, 3(4) (2010) 323-329.
- 7. K. Aldaş and F. Şen, Karma bağlantı uygulanmış farklı metal plakalarda meydana gelen gerilmelerin incelenmesi. Makine Teknolojileri Elektronik Dergisi, 8(2) (2011) 1-12.
- 8. K. Aldaş, F. Şen and H. Palancıoğlu, Stress analysis of adhesively bonded ad pinned single lap joints using three dimensional finite element models. Journel of Theoretical and Applied Mechanics, 41(2) (2011) 3-20.
Ayrıntılar
Birincil Dil
İngilizce
Konular
Mühendislik
Bölüm
Araştırma Makalesi
Yayımlanma Tarihi
30 Haziran 2017
Gönderilme Tarihi
21 Mart 2017
Kabul Tarihi
5 Nisan 2017
Yayımlandığı Sayı
Yıl 1970 Cilt: 1 Sayı: 1