Stress Analysis of Different Metal Combinations Under Different Temperatures with Hybrid Joints
Abstract
In this study, the stresses on various bonded
joints which made from different sheet metals were investigated by using finite
element method. The bonded joints planned as double-pin connection joints and
adhesive bonded joints. Six different material combinations were used in
joints. ANSYS finite element software was used for analysis, modeling and
solution. The models were designed as 3D. The stresses which applied
temperature load with tensile load to joints were investigated. As a result of
studies, the compression stresses in the models got high values and reached the
highest values at X-axis direction. Furthermore, there were stress
concentrations around the pin hole. Therefore, it can be easily seen that there
may be bearing damage around stress zone.
Keywords
References
- 1. K. Aldaş, F. Şen, Karma bağlantı uygulanmış farklı metal plakalarda meydana gelen gerilmelerin incelenmesi. Makine Teknolojileri Elektronik Dergisi, 8(2) (2011) 1-12.
- 2. M. Jackerle, Finite element analysis and simulation of adhesive bonding, soldering and brazing: A bibliography. Modeling and Simulation in Materials Science and Engineering, 5 (1976-1996) 159-185.
- 3. W.S. Chan and S. Vedhagiri, Analysis of composites bolted-bonded joints used in repairing. Journal of Composite Materials, 35(12) (2001) 1045-1061.
- 4. M.K. Apalak, K. Aldaş and F. Şen, Thermal non-linear stresses in an adhesively bonded and laser-spot welded single-lap joint during laser-metal interaction. Journal of Materials Processing Technology, 142 (2003) 1-19.
- 5. F. Şen, M. Pakdil, O. Sayman and S. Benli, Experimental failure analysis of mechanically fastened joints with clearance in composite laminates under preload. Materials & Design, 29 (2003) 1159-1169.
- 6. F. Şen and K. Aldaş, Sıcaklık değişiminin yapıştırmalı ve pimli alüminyum plakalardaki gerilmeler üzerine etkisi. TUBAV Bilim Dergisi, 3(4) (2010) 323-329.
- 7. K. Aldaş and F. Şen, Karma bağlantı uygulanmış farklı metal plakalarda meydana gelen gerilmelerin incelenmesi. Makine Teknolojileri Elektronik Dergisi, 8(2) (2011) 1-12.
- 8. K. Aldaş, F. Şen and H. Palancıoğlu, Stress analysis of adhesively bonded ad pinned single lap joints using three dimensional finite element models. Journel of Theoretical and Applied Mechanics, 41(2) (2011) 3-20.
Details
Primary Language
English
Subjects
Engineering
Journal Section
Research Article
Publication Date
June 30, 2017
Submission Date
March 21, 2017
Acceptance Date
April 5, 2017
Published in Issue
Year 1970 Volume: 1 Number: 1
