Yıl 2021,
, 36 - 45, 30.06.2021
Aziz Burak Yalçın
,
Filiz Sarı
Kaynakça
- [1] B.R. Behera, P.R. Meher, S.K. Mishra, Microwave antennas-An intrinsic part of RF energy harvesting systems: A contingent study about its design methodologies and state-of-art technologies in current scenario. Int. J. RF Microw. Computer-Aided Eng. 30 (5) (2020) 1–27.
[2] O. Assogba, A.K. Mbodji, A. Karim Diallo, Efficiency in RF energy harvesting systems: A comprehensive review. IBASE-BF 2020 - 1st IEEE Int. Conf. Nat. Eng. Sci. Sahel. Sustain. Dev. Impact Big Data Appl. Soc. Environ. (2020) 1 - 10.
- [3] H.J. Visser, R.J.M. Vullers, RF energy harvesting and transport for wireless sensor network applications: Principles and requirements. Proc. IEEE. 101 (2013) 1410–1423.
- [4] F. Akhtar, M.H. Rehmani, Energy replenishment using renewable and traditional energy resources for sustainable wireless sensor networks: A review. Renewable and Sustainable Energy Reviews. 45 (2015) 769–784.
- [5] L.G. Tran, H.K. Cha, W.T. Park, RF power harvesting: a review on designing methodologies and applications. Micro and Nano Syst. Lett. 5 (14) (2017).
- [6] U. Muncuk, K. Alemdar, J.D. Sarode, K.R. Chowdhury, Multiband ambient RF energy harvesting circuit design for enabling batteryless sensors and IoT. IEEE Internet Things J. 5 (4) (2018) 2700–2714.
- [7] Y. Uzun, Design of an efficient triple band RF energy harvester. Appl. Comput. Electromagn. Soc. J. 30 (2015) 1286–1293.
- [8] S. Agrawal, M.S. Parihar, P.N. Kondekar, A quad-band antenna for multi-band radio frequency energy harvesting circuit. AEU - Int. J. Electron. Commun. 85 (2018) 99–107.
- [9] H. Tafekirt, J. Pelegri-Sebastia, A. Bouajaj, B.M. Reda, A Sensitive Triple-Band Rectifier for Energy Harvesting Applications. IEEE Access. 8 (2020) 73659–73664.
- [10] S. Keyrouz, H.J. Visser, A.G. Tijhuis, Multi-band simultaneous radio frequency energy harvesting. 2013 7th Eur. Conf. Antennas Propagation, EuCAP 2013. (2013) 3058–3061.
- [11] F. Sari, Y. Uzun, A Comparative Study: Voltage Multipliers for Rf Energy Harvesting System. Commun.Fac.Sci.Univ.Ank.Series A2-A3. 61 (2019) 12–23.
- [12] S. Park, J. Yang, J. Rivas-Davila, A Hybrid Cockcroft-Walton/Dickson Multiplier for High Voltage Generation, IEEE Trans. Power Electron. 35 (2020) 2714–2723.
- [13] L. Wu, Design of Radio Frequency Power Amplifiers for Cellular Phones and Base Stations in Modern Mobile Communication Systems. Engineering, Computer Science (2009).
- [14] S. Agrawal, S.K. Pandey, J. Singh, M.S. Parihar, Realization of efficient RF energy harvesting circuits employing different matching technique, Fifteenth International Symposium on Quality Electronic Design (2014) 754–761.
- [15] R. Rhea, The Yin-Yang of Matching: Part 1-Basic Matching Concepts. High Freq. Electron. 5 (2006) 92–98.
- [16] M.M. Al-Azawy, F. Sari, Analysis of Dickson Voltage Multiplier for RF Energy Harvesting, Proc. - 2019 IEEE 1st Glob. Power, Energy Commun. Conf. GPECOM 2019. (2019) 10–14.
Efficiency Analysis for Triple Band RF Energy Harvesting
Yıl 2021,
, 36 - 45, 30.06.2021
Aziz Burak Yalçın
,
Filiz Sarı
Öz
In this paper, a multi-band RF energy harvesting circuit is designed. The output voltage and power of the system built at 900 MHz, 1800 MHz and 2450 MHz frequencies are revealed. All simulations in this paper are made using the Advance Design System (ADS) 2017 program. The load resistances that give the maximum power for each frequency are determined and the appropriate load is selected for all three frequencies. Then, the multi-stage Dickson Voltage Multiplier (DVM) from two to six stages is designed and the number of stages giving the maximum power for each frequency is determined using the selected load. L type and π type impedance matching have been applied to obtain the maximum output power in DVM design, which includes this number of stages and has two Schottky diode models (HSMS-2852). Finally, these three circuits are combined and the output voltage and efficiency of the resulting system are analyzed.
Kaynakça
- [1] B.R. Behera, P.R. Meher, S.K. Mishra, Microwave antennas-An intrinsic part of RF energy harvesting systems: A contingent study about its design methodologies and state-of-art technologies in current scenario. Int. J. RF Microw. Computer-Aided Eng. 30 (5) (2020) 1–27.
[2] O. Assogba, A.K. Mbodji, A. Karim Diallo, Efficiency in RF energy harvesting systems: A comprehensive review. IBASE-BF 2020 - 1st IEEE Int. Conf. Nat. Eng. Sci. Sahel. Sustain. Dev. Impact Big Data Appl. Soc. Environ. (2020) 1 - 10.
- [3] H.J. Visser, R.J.M. Vullers, RF energy harvesting and transport for wireless sensor network applications: Principles and requirements. Proc. IEEE. 101 (2013) 1410–1423.
- [4] F. Akhtar, M.H. Rehmani, Energy replenishment using renewable and traditional energy resources for sustainable wireless sensor networks: A review. Renewable and Sustainable Energy Reviews. 45 (2015) 769–784.
- [5] L.G. Tran, H.K. Cha, W.T. Park, RF power harvesting: a review on designing methodologies and applications. Micro and Nano Syst. Lett. 5 (14) (2017).
- [6] U. Muncuk, K. Alemdar, J.D. Sarode, K.R. Chowdhury, Multiband ambient RF energy harvesting circuit design for enabling batteryless sensors and IoT. IEEE Internet Things J. 5 (4) (2018) 2700–2714.
- [7] Y. Uzun, Design of an efficient triple band RF energy harvester. Appl. Comput. Electromagn. Soc. J. 30 (2015) 1286–1293.
- [8] S. Agrawal, M.S. Parihar, P.N. Kondekar, A quad-band antenna for multi-band radio frequency energy harvesting circuit. AEU - Int. J. Electron. Commun. 85 (2018) 99–107.
- [9] H. Tafekirt, J. Pelegri-Sebastia, A. Bouajaj, B.M. Reda, A Sensitive Triple-Band Rectifier for Energy Harvesting Applications. IEEE Access. 8 (2020) 73659–73664.
- [10] S. Keyrouz, H.J. Visser, A.G. Tijhuis, Multi-band simultaneous radio frequency energy harvesting. 2013 7th Eur. Conf. Antennas Propagation, EuCAP 2013. (2013) 3058–3061.
- [11] F. Sari, Y. Uzun, A Comparative Study: Voltage Multipliers for Rf Energy Harvesting System. Commun.Fac.Sci.Univ.Ank.Series A2-A3. 61 (2019) 12–23.
- [12] S. Park, J. Yang, J. Rivas-Davila, A Hybrid Cockcroft-Walton/Dickson Multiplier for High Voltage Generation, IEEE Trans. Power Electron. 35 (2020) 2714–2723.
- [13] L. Wu, Design of Radio Frequency Power Amplifiers for Cellular Phones and Base Stations in Modern Mobile Communication Systems. Engineering, Computer Science (2009).
- [14] S. Agrawal, S.K. Pandey, J. Singh, M.S. Parihar, Realization of efficient RF energy harvesting circuits employing different matching technique, Fifteenth International Symposium on Quality Electronic Design (2014) 754–761.
- [15] R. Rhea, The Yin-Yang of Matching: Part 1-Basic Matching Concepts. High Freq. Electron. 5 (2006) 92–98.
- [16] M.M. Al-Azawy, F. Sari, Analysis of Dickson Voltage Multiplier for RF Energy Harvesting, Proc. - 2019 IEEE 1st Glob. Power, Energy Commun. Conf. GPECOM 2019. (2019) 10–14.