Optical and Electrical Characterization of the Metal Oxide Composites by Hydrothermal Method

Canan Aksu Canbay; Rekawt Khdir Hamad; İskender Ozkul

doi:10.29002/asujse.555396

Research Article

Optical and Electrical Characterization of the Metal Oxide Composites by Hydrothermal Method

Year 2019, , 43 - 50, 30.06.2019

Canan Aksu Canbay , Rekawt Khdir Hamad İskender Ozkul

https://doi.org/10.29002/asujse.555396

Abstract

Metal oxide and
metallic composites are commonly used in material science. Oxides can perform
different physical features by small shift during synthesis. That commonly
tends innovative results. In this study copper phthalocyanine based four
different composite semiconductor materials fabricated by hydrothermal method.
The samples were analyzed by optical and electrical characterization
measurements. Reflectance, band gap values and conductivity results obtained
and presented as graphics with discussion.

Keywords

Hydrothermal method, optical characterization, electrical characterization

Supporting Institution

This work is financially supported by FÜBAP, Project No: FF.16.33

Project Number

FF.16.33

References

[1] P. Ayyub, V. Palkar, S. Chattopadhyay and M. Multani, Physical Review B, 51 (9) (1995) 6135.
[2] M. Fernandez-Garcia, A. Martinez-Arias, J. Hanson and J. Rodriguez, Chemical Reviews, 104 (9) (2004) 4063-4104.
[3] H. Gleiter, Nanostructured materials, 6 (1-4) (1995) 3-14.
[4] M. S. Tokumoto, S. H. Pulcinelli, C. V. Santilli and V. Briois, The Journal of Physical Chemistry B, 107 (2) (2003) 568-574.
[5] A. Aimable, B. Xin, N. Millot and D. Aymes, Journal of Solid State Chemistry, 181 (1) (2008) 183-189.
[6] J. McHale, A. Auroux, A. Perrotta and A. Navrotsky, Science, 277 (5327) (1997) 788-791.
[7] H. Zhang and J. F. Banfield, Chemistry of materials, 17 (13) (2005) 3421-3425.
[8] M. D. Hernández-Alonso, A. B. Hungría, A. Martínez-Arias, J. M. Coronado, J. C. Conesa, J. Soria and M. Fernández-García, Physical Chemistry Chemical Physics, 6 (13) (2004) 3524-3529.
[9] R. Cammarata and K. Sieradzki, Physical review letters, 62 (17) (1989) 2005.
[10] M. Fernández-García, X. Wang, C. Belver, A. Iglesias-Juez, J. C. Hanson and J. A. Rodriguez, Chemistry of materials, 17 (16) (2005) 4181-4193.
[11] J. Hasnidawani, H. Azlina, H. Norita, N. Bonnia, S. Ratim and E. Ali, Procedia Chemistry, 19 (2016) 211-216.
[12] M. El-Nahass, Z. El-Gohary and H. Soliman, Optics & Laser Technology, 35 (7) (2003) 523-531.
[13] E. Jungyoon, S. Kim, E. Lim, K. Lee, D. Cha and B. Friedman, Applied Surface Science, 205 (1-4) (2003) 274-279.
[14] E. Orti, J. Bredas and C. Clarisse, The Journal of chemical physics, 92 (2) (1990) 1228-1235.
[15] J. Puigdollers, C. Voz, M. Fonrodona, S. Cheylan, M. Stella, J. Andreu, M. Vetter and R. Alcubilla, Journal of Non-Crystalline Solids, 352 (9-20) (2006) 1778-1782.
[16] Z. Bao, A. J. Lovinger and A. Dodabalapur, Applied Physics Letters, 69 (20) (1996) 3066-3068.
[17] K. Xiao, Y. Liu, G. Yu and D. Zhu, Synthetic metals, 1 (137) (2003) 991-992.
[18] S. Martellucci, A. N. Chester and A. G. Mignani, Optical sensors and microsystems, (Springer, 2002) 3-315.
[19] R. Hamad, Production and characterization of the metal oxide - organo metalic composites by hydrothermal method, (The Graduate School of Natural and Applied Science, Fırat University, Elazığ, Turkey, 2017) 1-67.