EN
Efficiency Analysis for Triple Band RF Energy Harvesting
Abstract
In this paper, a multi-band RF energy harvesting circuit is designed. The output voltage and power of the system built at 900 MHz, 1800 MHz and 2450 MHz frequencies are revealed. All simulations in this paper are made using the Advance Design System (ADS) 2017 program. The load resistances that give the maximum power for each frequency are determined and the appropriate load is selected for all three frequencies. Then, the multi-stage Dickson Voltage Multiplier (DVM) from two to six stages is designed and the number of stages giving the maximum power for each frequency is determined using the selected load. L type and π type impedance matching have been applied to obtain the maximum output power in DVM design, which includes this number of stages and has two Schottky diode models (HSMS-2852). Finally, these three circuits are combined and the output voltage and efficiency of the resulting system are analyzed.
Keywords
References
- [1] B.R. Behera, P.R. Meher, S.K. Mishra, Microwave antennas-An intrinsic part of RF energy harvesting systems: A contingent study about its design methodologies and state-of-art technologies in current scenario. Int. J. RF Microw. Computer-Aided Eng. 30 (5) (2020) 1–27. [2] O. Assogba, A.K. Mbodji, A. Karim Diallo, Efficiency in RF energy harvesting systems: A comprehensive review. IBASE-BF 2020 - 1st IEEE Int. Conf. Nat. Eng. Sci. Sahel. Sustain. Dev. Impact Big Data Appl. Soc. Environ. (2020) 1 - 10.
- [3] H.J. Visser, R.J.M. Vullers, RF energy harvesting and transport for wireless sensor network applications: Principles and requirements. Proc. IEEE. 101 (2013) 1410–1423.
- [4] F. Akhtar, M.H. Rehmani, Energy replenishment using renewable and traditional energy resources for sustainable wireless sensor networks: A review. Renewable and Sustainable Energy Reviews. 45 (2015) 769–784.
- [5] L.G. Tran, H.K. Cha, W.T. Park, RF power harvesting: a review on designing methodologies and applications. Micro and Nano Syst. Lett. 5 (14) (2017).
- [6] U. Muncuk, K. Alemdar, J.D. Sarode, K.R. Chowdhury, Multiband ambient RF energy harvesting circuit design for enabling batteryless sensors and IoT. IEEE Internet Things J. 5 (4) (2018) 2700–2714.
- [7] Y. Uzun, Design of an efficient triple band RF energy harvester. Appl. Comput. Electromagn. Soc. J. 30 (2015) 1286–1293.
- [8] S. Agrawal, M.S. Parihar, P.N. Kondekar, A quad-band antenna for multi-band radio frequency energy harvesting circuit. AEU - Int. J. Electron. Commun. 85 (2018) 99–107.
- [9] H. Tafekirt, J. Pelegri-Sebastia, A. Bouajaj, B.M. Reda, A Sensitive Triple-Band Rectifier for Energy Harvesting Applications. IEEE Access. 8 (2020) 73659–73664.
Details
Primary Language
English
Subjects
Engineering
Journal Section
Research Article
Publication Date
June 30, 2021
Submission Date
April 7, 2021
Acceptance Date
May 25, 2021
Published in Issue
Year 2021 Volume: 5 Number: 1
APA
Yalçın, A. B., & Sarı, F. (2021). Efficiency Analysis for Triple Band RF Energy Harvesting. Aksaray University Journal of Science and Engineering, 5(1), 36-45. https://doi.org/10.29002/asujse.911507
Cited By
Çift Bantlı RF Enerji Hasadı İçin Toplu Eleman Devre Yapıları
European Journal of Science and Technology
https://doi.org/10.31590/ejosat.10100302.45 GHz Wi-Fi RF Enerji Hasadı için Parametrelerin Belirlenmesi
Aksaray University Journal of Science and Engineering
https://doi.org/10.29002/asujse.1400173
