Araştırma Makalesi
BibTex RIS Kaynak Göster

Enhancing Sustainability in Asphalt Concrete: Utilizing Ceramic Cake Waste and Performance Analysis

Yıl 2023, Cilt: 2 Sayı: 3, 104 - 116, 24.10.2023

Öz

The rapid growth of the global population has led to an increased demand for vehicles and industrial products, resulting in heightened production levels. Unfortunately, this surge in production inevitably generates significant amounts of waste, which, when not effectively managed, contributes to environmental pollution and poses challenges for waste storage. To address these pressing concerns, scientific research has been actively exploring ways to repurpose waste materials across various sectors to promote sustainability. This study delves into the innovative concept of incorporating ceramic cake waste (CCW) as an alternative aggregate material in the production of asphalt concrete -a key material in road construction. Our research explored the feasibility of incorporating CCW into asphalt concrete, typically consisting of aggregates and bitumen. We identified a pivotal threshold through rigorous testing and analysis: incorporating up to 20% CCW in asphalt concrete production aligns with industry standards. This approach not only aids in reducing environmental and visual pollution but also optimizes waste storage and resource utilization, ultimately contributing to a healthier environment and improved quality of life. In conclusion, our study takes a significant step towards promoting sustainability in the road construction sector. The findings provide a foundation for the further exploration and adoption of ceramic cake waste reuse in road construction, offering a promising solution and awareness to address the challenges posed by increasing waste generation and the imperative for sustainable development.

Kaynakça

  • [1] Abdulrasool AT, Kadhim YN, Hussain WAM, Kashesh GJ, Abdulhussein HA. “The effect of cow dung ash as a filler on the mechanical characteristics of hot mix asphalt”. In IOP Conference Series: Earth and Environmental Science (Vol. 961, No. 1, p. 012041). IOP Publishing, 2022.
  • [2] Sang L, Idowu T, Okumu V. “Evaluation of the performance of waste marble dust as a mineral filler in hot-mix asphalt concrete”. Journal of Civil Engineering, Science and Technology, 12(1), 1-14, 2021.
  • [3] Keskin M, Karacasu M. “Effect of boron containing additives on asphalt performance and sustainability perspective”. Construction and Building Materials, 218, 434-447, 2019.
  • [4] Khan D, Khan R, Khan MT, Alam M, Hassan T. “Performance of hot-mix asphalt using polymer-modified bitumen and marble dust as a filler”. Journal of Traffic and Transportation Engineering (English Edition), 2023.
  • [5] Ming NC, Jaya RP, Awang H, Ing NLS, Hasan MRM, Al-Saffar ZH. “Performance of glass powder as bitumen modifier in hot mix asphalt”. Physics and Chemistry of the Earth, Parts A/B/C, 128, 103263, 2022.
  • [6] Jiang W, Bao R, Lu H, Yuan D, Lu R, Sha A, Shan J. “Analysis of rheological properties and aging mechanism of bitumen after short-term and long-term aging”. Construction and Building Materials, 273, 121777, 2021.
  • [7] Raschia S, Tattolo S. “Use of alternative aggregates for the production of hot-mix asphalt surface layers: A performance evaluation”. Construction and Building Materials, 345, 128369, 2022.
  • [8] Yaro NSA, Sutanto MH, Habib NZ, Napiah M, Usman A, Al-Sabaeei AM, Rafiq W. “Feasibility evaluation of waste palm oil clinker powder as a fillers substitute for eco-friendly hot mix asphalt pavement”. International Journal of Pavement Research and Technology, 1-14, 2022.
  • [9] Babalghaith AM, Koting S, Sulong NHR, Khan MZH, Milad A, Yusoff NIM, Ibrahim MR, Mohamed AHBN. “A systematic review of the utilization of waste materials as aggregate replacement in stone matrix asphalt mixes”. Environmental Science and Pollution Research, 29(24), 35557-35582, 2022.
  • [10] Luo Y, Zhang K. “Review on performance of asphalt and asphalt mixture with waste cooking oil”. Materials, 16(4), 1341, 2023.
  • [11] Yaro NSA, Sutanto MH, Baloo L, Habib NZ, Usman A, Yousafzai AK, Ahmad A, Birniwa AH, Jagaba AH, Noor A. “A comprehensive overview of the utilization of recycled waste materials and technologies in asphalt pavements: towards environmental and sustainable low-carbon roads”. Processes, 11(7), 2095, 2023.
  • [12] Ali AM, Al-Mansoori T. “Investigation of asphalt binder performance modified with ceramic waste powder”. In IOP Conference Series: Materials Science and Engineering, 1090, 1. IOP Publishing, 2021.
  • [13] Fatima E, Sahu S, Jhamb A, Kumar R. “Use of ceramic waste as filler in semi-dense bituminous concrete”. American Journal of Civil Engineering and Architecture, 2(3), 102-106, 2014.
  • [14] Gülşah ÖZ, Saltan M. “Pirinanın Bitüm Modifikasyonunda Kullanımının araştırılması”. International Journal of Technological Sciences, 12(1), 2020.
  • [15] Cao W. “Study on properties of recycled tire rubber modified asphalt mixtures using dry process”. Construction and building materials, 21(5), 1011-1015, 2007.
  • [16] Kaçaroğlu G, Saltan M. “Cocamide diethanolamide kimyasalının bitüm modifikasyonunda kullanımı”. Pamukkale University Journal of Engineering Sciences, 26(6), 1042-1047, 2020.
  • [17] Sanchez-Cotte EH, Fuentes L, Martinez-Arguelles G, Quintana HAR, Walubita LF, Cantero-Durango JM. “Influence of recycled concrete aggregates from different sources in hot mix asphalt design”. Construction and Building Materials, 259, 120427, 2020.
  • [18] Kök BV, Yılmaz M, Kuloğlu N. “Asfaltit ve SBS Modifiyeli Bitümlü Sıcak Karışımların Mekanik Özelliklerinin Değerlendirilmesi”. Journal of Polytechnic, 14(3), 193-197, 2011.
  • [19] Wu S, Montalvo L. “Repurposing waste plastics into cleaner asphalt pavement materials: A critical literature review”. Journal of Cleaner Production, 280, 124355, 2021.
  • [20] Kara Ç, Karacasu M. “Use of ceramic wastes in road pavement design”. In Proceedings of the world congress on new technologies. Barcelona, Spain (pp. 226-6), 2015.
  • [21] Republic of Turkey General Directorate of Highways. “Highways Technical Specification”. Ankara, 2013.
  • [22] Asphalt Institute. “Superpave Mix Design”. Superpave Series No 2, 56, Lexington, 1996.
  • [23] Atakan M, Yıldız K. “Prediction of Marshall design parameters of asphalt mixtures via machine learning algorithms based on literature data”. Road Materials and Pavement Design, 1-20, 2023.
  • [24] Awan HH, Hussain A, Javed MF, Qiu Y, Alrowais R, Mohamed AM, Fathi D, Alzahrani AM. “Predicting marshall flow and marshall stability of asphalt pavements using multi expression programming”. Buildings, 12(3), 314, 2022.
  • [25] Kandhal PS, Koehler WS. “Marshall mix design method: current practices”. In Association of Asphalt Paving Technologists Proc (Vol. 54), 1985.
  • [26] Karacasu, M. “Yol Üstyapı Deneyleri”. Sözkesen Matbaacılık Ltd. Şti,, Ankara, 2016.
  • [27] Khodadadi M, Moradi L, Dabir B, Nejad FM, Khodaii A. “Reuse of drill cuttings in hot mix asphalt mixture: A study on the environmental and structure performance”. Construction and Building Materials, 256, 119453, 2020.
  • [28] Tapkın S, Çevik A, Uşar Ü. “Prediction of Marshall test results for polypropylene modified dense bituminous mixtures using neural networks”. Expert Systems with Applications, 37(6), 4660-4670, 2010.
  • [29] Wan L, Garcia-Hernández A, Cui G, Liu P. “A novel performance-based method to design asphalt mixtures”. Construction and Building Materials, 400, 132792, 2023.
  • [30] White TD. “Marshall procedures for design and quality control of asphalt mixtures”. In Association of asphalt paving technologists proc, 54, 1985.
  • [31] Kara Ç, Karacasu M. “Investigation of waste ceramic tile additive in hot mix asphalt using fuzzy logic approach”. Construction and Building Materials, 141, 598-607, 2017.

Asfalt Betonunda Sürdürülebilirliğin Artırılması: Seramik Kek Atığının Kullanımı ve Performans Analizi

Yıl 2023, Cilt: 2 Sayı: 3, 104 - 116, 24.10.2023

Öz

Küresel nüfusun hızlı büyümesi, araçlara ve endüstriyel ürünlere olan talebin artmasına ve bunun sonucunda üretim seviyelerinin artmasına neden olmaktadır. Ne yazık ki, üretimdeki bu artış kaçınılmaz olarak önemli miktarda atık üretmektedir. Bu atıklar etkili bir şekilde yönetilmediğinde çevre kirliliğine sebep olmakta ve atık depolama konusunda zorluklara yol açmaktadır. Bu sorunları gidermek için sürdürülebilirliği teşvik etmek amacıyla çeşitli sektörlerde atık malzemeleri yeniden kullanmanın yolları bilimsel çalışmalarda aktif olarak araştırılmaktadır. Bu çalışmada, yol yapımında önemli bir malzeme olan asfalt betonu üretiminde seramik kek atığının (SKA) alternatif bir agrega malzemesi olarak kullanılmasına yönelik yenilikçi konsept incelenmektedir. Araştırmamız, SKA'nın, tipik olarak agrega ve bitümden oluşan asfalt betonuna dahil edilmesinin fizibilitesini sunmaktadır. Titiz test ve analizler sonucunda, asfalt betonu üretimine %20'ye kadar SKA'nın dahil edilmesi endüstri standartlarına uygun olduğu belirlenmiştir. Bu yaklaşım çevre ve görsel kirliliğin azaltılmasına yardımcı olurken, aynı zamanda atıkların depolanması ve uygun kullanılması ile daha sağlıklı bir çevreye ve yaşam kalitesinin iyileştirilmesine katkıda bulunmaktadır. Sonuç olarak, çalışmamız yol inşaatı sektöründe sürdürülebilirliğin teşvik edilmesi yönünde önemli bir adım atmaktadır. Bulgular, seramik kek atıklarının yol yapımında yeniden kullanılmasının daha fazla araştırılması ve benimsenmesi için temel oluşturmakta ve artan atık üretiminin yarattığı zorluklara ve sürdürülebilir kalkınma zorunluluğuna çözüm bulmak için umut verici bir çözüm ve farkındalık sunmaktadır.

Kaynakça

  • [1] Abdulrasool AT, Kadhim YN, Hussain WAM, Kashesh GJ, Abdulhussein HA. “The effect of cow dung ash as a filler on the mechanical characteristics of hot mix asphalt”. In IOP Conference Series: Earth and Environmental Science (Vol. 961, No. 1, p. 012041). IOP Publishing, 2022.
  • [2] Sang L, Idowu T, Okumu V. “Evaluation of the performance of waste marble dust as a mineral filler in hot-mix asphalt concrete”. Journal of Civil Engineering, Science and Technology, 12(1), 1-14, 2021.
  • [3] Keskin M, Karacasu M. “Effect of boron containing additives on asphalt performance and sustainability perspective”. Construction and Building Materials, 218, 434-447, 2019.
  • [4] Khan D, Khan R, Khan MT, Alam M, Hassan T. “Performance of hot-mix asphalt using polymer-modified bitumen and marble dust as a filler”. Journal of Traffic and Transportation Engineering (English Edition), 2023.
  • [5] Ming NC, Jaya RP, Awang H, Ing NLS, Hasan MRM, Al-Saffar ZH. “Performance of glass powder as bitumen modifier in hot mix asphalt”. Physics and Chemistry of the Earth, Parts A/B/C, 128, 103263, 2022.
  • [6] Jiang W, Bao R, Lu H, Yuan D, Lu R, Sha A, Shan J. “Analysis of rheological properties and aging mechanism of bitumen after short-term and long-term aging”. Construction and Building Materials, 273, 121777, 2021.
  • [7] Raschia S, Tattolo S. “Use of alternative aggregates for the production of hot-mix asphalt surface layers: A performance evaluation”. Construction and Building Materials, 345, 128369, 2022.
  • [8] Yaro NSA, Sutanto MH, Habib NZ, Napiah M, Usman A, Al-Sabaeei AM, Rafiq W. “Feasibility evaluation of waste palm oil clinker powder as a fillers substitute for eco-friendly hot mix asphalt pavement”. International Journal of Pavement Research and Technology, 1-14, 2022.
  • [9] Babalghaith AM, Koting S, Sulong NHR, Khan MZH, Milad A, Yusoff NIM, Ibrahim MR, Mohamed AHBN. “A systematic review of the utilization of waste materials as aggregate replacement in stone matrix asphalt mixes”. Environmental Science and Pollution Research, 29(24), 35557-35582, 2022.
  • [10] Luo Y, Zhang K. “Review on performance of asphalt and asphalt mixture with waste cooking oil”. Materials, 16(4), 1341, 2023.
  • [11] Yaro NSA, Sutanto MH, Baloo L, Habib NZ, Usman A, Yousafzai AK, Ahmad A, Birniwa AH, Jagaba AH, Noor A. “A comprehensive overview of the utilization of recycled waste materials and technologies in asphalt pavements: towards environmental and sustainable low-carbon roads”. Processes, 11(7), 2095, 2023.
  • [12] Ali AM, Al-Mansoori T. “Investigation of asphalt binder performance modified with ceramic waste powder”. In IOP Conference Series: Materials Science and Engineering, 1090, 1. IOP Publishing, 2021.
  • [13] Fatima E, Sahu S, Jhamb A, Kumar R. “Use of ceramic waste as filler in semi-dense bituminous concrete”. American Journal of Civil Engineering and Architecture, 2(3), 102-106, 2014.
  • [14] Gülşah ÖZ, Saltan M. “Pirinanın Bitüm Modifikasyonunda Kullanımının araştırılması”. International Journal of Technological Sciences, 12(1), 2020.
  • [15] Cao W. “Study on properties of recycled tire rubber modified asphalt mixtures using dry process”. Construction and building materials, 21(5), 1011-1015, 2007.
  • [16] Kaçaroğlu G, Saltan M. “Cocamide diethanolamide kimyasalının bitüm modifikasyonunda kullanımı”. Pamukkale University Journal of Engineering Sciences, 26(6), 1042-1047, 2020.
  • [17] Sanchez-Cotte EH, Fuentes L, Martinez-Arguelles G, Quintana HAR, Walubita LF, Cantero-Durango JM. “Influence of recycled concrete aggregates from different sources in hot mix asphalt design”. Construction and Building Materials, 259, 120427, 2020.
  • [18] Kök BV, Yılmaz M, Kuloğlu N. “Asfaltit ve SBS Modifiyeli Bitümlü Sıcak Karışımların Mekanik Özelliklerinin Değerlendirilmesi”. Journal of Polytechnic, 14(3), 193-197, 2011.
  • [19] Wu S, Montalvo L. “Repurposing waste plastics into cleaner asphalt pavement materials: A critical literature review”. Journal of Cleaner Production, 280, 124355, 2021.
  • [20] Kara Ç, Karacasu M. “Use of ceramic wastes in road pavement design”. In Proceedings of the world congress on new technologies. Barcelona, Spain (pp. 226-6), 2015.
  • [21] Republic of Turkey General Directorate of Highways. “Highways Technical Specification”. Ankara, 2013.
  • [22] Asphalt Institute. “Superpave Mix Design”. Superpave Series No 2, 56, Lexington, 1996.
  • [23] Atakan M, Yıldız K. “Prediction of Marshall design parameters of asphalt mixtures via machine learning algorithms based on literature data”. Road Materials and Pavement Design, 1-20, 2023.
  • [24] Awan HH, Hussain A, Javed MF, Qiu Y, Alrowais R, Mohamed AM, Fathi D, Alzahrani AM. “Predicting marshall flow and marshall stability of asphalt pavements using multi expression programming”. Buildings, 12(3), 314, 2022.
  • [25] Kandhal PS, Koehler WS. “Marshall mix design method: current practices”. In Association of Asphalt Paving Technologists Proc (Vol. 54), 1985.
  • [26] Karacasu, M. “Yol Üstyapı Deneyleri”. Sözkesen Matbaacılık Ltd. Şti,, Ankara, 2016.
  • [27] Khodadadi M, Moradi L, Dabir B, Nejad FM, Khodaii A. “Reuse of drill cuttings in hot mix asphalt mixture: A study on the environmental and structure performance”. Construction and Building Materials, 256, 119453, 2020.
  • [28] Tapkın S, Çevik A, Uşar Ü. “Prediction of Marshall test results for polypropylene modified dense bituminous mixtures using neural networks”. Expert Systems with Applications, 37(6), 4660-4670, 2010.
  • [29] Wan L, Garcia-Hernández A, Cui G, Liu P. “A novel performance-based method to design asphalt mixtures”. Construction and Building Materials, 400, 132792, 2023.
  • [30] White TD. “Marshall procedures for design and quality control of asphalt mixtures”. In Association of asphalt paving technologists proc, 54, 1985.
  • [31] Kara Ç, Karacasu M. “Investigation of waste ceramic tile additive in hot mix asphalt using fuzzy logic approach”. Construction and Building Materials, 141, 598-607, 2017.
Toplam 31 adet kaynakça vardır.

Ayrıntılar

Birincil Dil İngilizce
Konular Ulaştırma Mühendisliği
Bölüm Research Articles
Yazarlar

Murat Karacasu 0000-0001-9721-0984

Zahir Wafaie Bu kişi benim 0000-0003-3572-073X

Kadir Berkhan Akalın 0000-0001-6720-5498

Yayımlanma Tarihi 24 Ekim 2023
Yayımlandığı Sayı Yıl 2023 Cilt: 2 Sayı: 3

Kaynak Göster

APA Karacasu, M., Wafaie, Z., & Akalın, K. B. (2023). Enhancing Sustainability in Asphalt Concrete: Utilizing Ceramic Cake Waste and Performance Analysis. Firat University Journal of Experimental and Computational Engineering, 2(3), 104-116.
AMA Karacasu M, Wafaie Z, Akalın KB. Enhancing Sustainability in Asphalt Concrete: Utilizing Ceramic Cake Waste and Performance Analysis. FUJECE. Ekim 2023;2(3):104-116.
Chicago Karacasu, Murat, Zahir Wafaie, ve Kadir Berkhan Akalın. “Enhancing Sustainability in Asphalt Concrete: Utilizing Ceramic Cake Waste and Performance Analysis”. Firat University Journal of Experimental and Computational Engineering 2, sy. 3 (Ekim 2023): 104-16.
EndNote Karacasu M, Wafaie Z, Akalın KB (01 Ekim 2023) Enhancing Sustainability in Asphalt Concrete: Utilizing Ceramic Cake Waste and Performance Analysis. Firat University Journal of Experimental and Computational Engineering 2 3 104–116.
IEEE M. Karacasu, Z. Wafaie, ve K. B. Akalın, “Enhancing Sustainability in Asphalt Concrete: Utilizing Ceramic Cake Waste and Performance Analysis”, FUJECE, c. 2, sy. 3, ss. 104–116, 2023.
ISNAD Karacasu, Murat vd. “Enhancing Sustainability in Asphalt Concrete: Utilizing Ceramic Cake Waste and Performance Analysis”. Firat University Journal of Experimental and Computational Engineering 2/3 (Ekim 2023), 104-116.
JAMA Karacasu M, Wafaie Z, Akalın KB. Enhancing Sustainability in Asphalt Concrete: Utilizing Ceramic Cake Waste and Performance Analysis. FUJECE. 2023;2:104–116.
MLA Karacasu, Murat vd. “Enhancing Sustainability in Asphalt Concrete: Utilizing Ceramic Cake Waste and Performance Analysis”. Firat University Journal of Experimental and Computational Engineering, c. 2, sy. 3, 2023, ss. 104-16.
Vancouver Karacasu M, Wafaie Z, Akalın KB. Enhancing Sustainability in Asphalt Concrete: Utilizing Ceramic Cake Waste and Performance Analysis. FUJECE. 2023;2(3):104-16.