Investigation of the Effect on Tribological Properties of the use of Pinus Brutia Cone as a Binder in Brake Pads

İlker Sugözü; Kürşat Kahya

doi:10.26701/ems.471131

Araştırma Makalesi

Investigation of the Effect on Tribological Properties of the use of Pinus Brutia Cone as a Binder in Brake Pads

Yıl 2018, Cilt: 2 Sayı: 4, 115 - 118, 20.12.2018

İlker Sugözü Kürşat Kahya

https://doi.org/10.26701/ems.471131

Cited By: 8

Öz

Phenolic resin is invariably
used as binder material for friction composites. But alternative materials are
considered alternatively to phenolic resin due to negativities such as poor
shelf life, harmful volatiles during processing, the need for addition of
curing agent before shipment, shrinkage and voids in final products. For these
reasons, pinus brutia cones are ground and pulverized and added to the brake
lining content at different rates and thus 3 different samples were produced.
The wear and friction tests of these samples were made on pin-on disc type
brake lining test machine. After this, the density of the samples was
determined by using Archimedes scale. The hardness was determined in the
Brinell tester. And finally, the microstructure properties of the samples were
determined by using a scanning electron microscope (SEM).

Anahtar Kelimeler

Pinus brutia cone, brake pad, friction

Kaynakça

[1] M.G. Jacko, S.K. Rhee, 1992, Kirk-Othmer Encyclopedia of Chemical Technology, vol. 4, 4th ed., Wiley, New York.
[2] M.G. Jacko, P.H.S. Tsang, S.K. Rhee, 1984, Automotive friction materials evolution during the past decade, Wear, Vol. 100, 1-3 503–515.
[3] A.E. Anderson, ASM Handbook, Friction, Lubrication and Wear Technology, vol. 18, ASM International, 1992, pp. 569–577.
[4] Y. Handa, T. Kato, 1996, Effect of Cu powder, BaSO4 and cashew dust on the wear and friction characteristics of automotive brake pads, Tribol. Trans. 39 (2), 346–353.
[5] Sugözü, B., Dağhan, B. (2016). Effect of BaSO4 on tribological properties of brake friction materials. IJIRSET, 5(12), 30-35.
[6] Uluocak İ., Yavuz H., Gürsul M., 2017, Effects of Rotor Material on Eddy Current Brake Performance, European Mechanical Science, 1 (4), 129-132.
[7] Sugozu, B. (2018). Investigation of ulexite usage in automotive brake friction materials. Turkish Journal of Engineering, 2(3), 125-129.
[8] H. Jang, S.J. Kim, 2000, The effects of antimony trisulfide (Sb2S3) and zirconium silicate (ZrSiO4) in the automotive brake friction material on friction characteristics, Wear 239 (2), 229–236.
[9] Sugözü, B., Dağhan, B., Akdemir, A. (2018). Effect of the size on the friction characteristics of brake friction materials: a case study with Al2O3. Industrial Lubrication and Tribology, 70(6), 1020-1024.
[10] H. Jang, K. Ko, S.J. Kim, R.H. Basch, J.W. Fash, 2004, The effect of metal fibers on the friction performance of automotive brake friction materialsWear 256 (3-4) 406–414.
[11] Sugozu, I., Mutlu, I., Sugozu, B. (2016). The effect of colemanite on the friction performance of automotive brake friction materials. Industrial Lubrication and Tribology, 68(1), 92-98.
[12] K.H.Cho, H.Jang, Y.-S.Hong, S.J.Kim, R.H.Basch, J.W.Fash, 2008, The size effect of zircon particles on the friction characteristics of brake lining materials, 264 (3-4), 291-297.
[13] Sugozu, B., Daghan, B., Akdemir, A., Ataberk, N. (2016). Friction and wear properties of friction materials containing nano/micro-sized SiO2 particles. Industrial Lubrication and Tribology, 68(2), 259-266.
[14] TS 555 (Turkish Standard), Highway vehicles, brake systems, brake pads for frictional brake, Turkey, 1992
[15] British Standards Specification: BS AU 142–1968, 1968
[16] Arnold, E. A., Friction, lubrication and wear technology, ASM handbook, 18:569577, 1983.

Yıl 2018, Cilt: 2 Sayı: 4, 115 - 118, 20.12.2018

İlker Sugözü Kürşat Kahya

https://doi.org/10.26701/ems.471131

Cited By: 8

Öz

Kaynakça

[1] M.G. Jacko, S.K. Rhee, 1992, Kirk-Othmer Encyclopedia of Chemical Technology, vol. 4, 4th ed., Wiley, New York.
[2] M.G. Jacko, P.H.S. Tsang, S.K. Rhee, 1984, Automotive friction materials evolution during the past decade, Wear, Vol. 100, 1-3 503–515.
[3] A.E. Anderson, ASM Handbook, Friction, Lubrication and Wear Technology, vol. 18, ASM International, 1992, pp. 569–577.
[4] Y. Handa, T. Kato, 1996, Effect of Cu powder, BaSO4 and cashew dust on the wear and friction characteristics of automotive brake pads, Tribol. Trans. 39 (2), 346–353.
[5] Sugözü, B., Dağhan, B. (2016). Effect of BaSO4 on tribological properties of brake friction materials. IJIRSET, 5(12), 30-35.
[6] Uluocak İ., Yavuz H., Gürsul M., 2017, Effects of Rotor Material on Eddy Current Brake Performance, European Mechanical Science, 1 (4), 129-132.
[7] Sugozu, B. (2018). Investigation of ulexite usage in automotive brake friction materials. Turkish Journal of Engineering, 2(3), 125-129.
[8] H. Jang, S.J. Kim, 2000, The effects of antimony trisulfide (Sb2S3) and zirconium silicate (ZrSiO4) in the automotive brake friction material on friction characteristics, Wear 239 (2), 229–236.
[9] Sugözü, B., Dağhan, B., Akdemir, A. (2018). Effect of the size on the friction characteristics of brake friction materials: a case study with Al2O3. Industrial Lubrication and Tribology, 70(6), 1020-1024.
[10] H. Jang, K. Ko, S.J. Kim, R.H. Basch, J.W. Fash, 2004, The effect of metal fibers on the friction performance of automotive brake friction materialsWear 256 (3-4) 406–414.
[11] Sugozu, I., Mutlu, I., Sugozu, B. (2016). The effect of colemanite on the friction performance of automotive brake friction materials. Industrial Lubrication and Tribology, 68(1), 92-98.
[12] K.H.Cho, H.Jang, Y.-S.Hong, S.J.Kim, R.H.Basch, J.W.Fash, 2008, The size effect of zircon particles on the friction characteristics of brake lining materials, 264 (3-4), 291-297.
[13] Sugozu, B., Daghan, B., Akdemir, A., Ataberk, N. (2016). Friction and wear properties of friction materials containing nano/micro-sized SiO2 particles. Industrial Lubrication and Tribology, 68(2), 259-266.
[14] TS 555 (Turkish Standard), Highway vehicles, brake systems, brake pads for frictional brake, Turkey, 1992
[15] British Standards Specification: BS AU 142–1968, 1968
[16] Arnold, E. A., Friction, lubrication and wear technology, ASM handbook, 18:569577, 1983.

Toplam 16 adet kaynakça vardır.

Ayrıntılar

Birincil Dil	İngilizce
Konular	Makine Mühendisliği
Bölüm	Research Article
Yazarlar	İlker Sugözü 0000-0001-5677-3529 Kürşat Kahya Bu kişi benim
Yayımlanma Tarihi	20 Aralık 2018
Kabul Tarihi	16 Kasım 2018
Yayımlandığı Sayı	Yıl 2018 Cilt: 2 Sayı: 4

Kaynak Göster

APA	Sugözü, İ., & Kahya, K. (2018). Investigation of the Effect on Tribological Properties of the use of Pinus Brutia Cone as a Binder in Brake Pads. European Mechanical Science, 2(4), 115-118. https://doi.org/10.26701/ems.471131
AMA	Sugözü İ, Kahya K. Investigation of the Effect on Tribological Properties of the use of Pinus Brutia Cone as a Binder in Brake Pads. EMS. Aralık 2018;2(4):115-118. doi:10.26701/ems.471131
Chicago	Sugözü, İlker, ve Kürşat Kahya. “Investigation of the Effect on Tribological Properties of the Use of Pinus Brutia Cone As a Binder in Brake Pads”. European Mechanical Science 2, sy. 4 (Aralık 2018): 115-18. https://doi.org/10.26701/ems.471131.
EndNote	Sugözü İ, Kahya K (01 Aralık 2018) Investigation of the Effect on Tribological Properties of the use of Pinus Brutia Cone as a Binder in Brake Pads. European Mechanical Science 2 4 115–118.
IEEE	İ. Sugözü ve K. Kahya, “Investigation of the Effect on Tribological Properties of the use of Pinus Brutia Cone as a Binder in Brake Pads”, EMS, c. 2, sy. 4, ss. 115–118, 2018, doi: 10.26701/ems.471131.
ISNAD	Sugözü, İlker - Kahya, Kürşat. “Investigation of the Effect on Tribological Properties of the Use of Pinus Brutia Cone As a Binder in Brake Pads”. European Mechanical Science 2/4 (Aralık 2018), 115-118. https://doi.org/10.26701/ems.471131.
JAMA	Sugözü İ, Kahya K. Investigation of the Effect on Tribological Properties of the use of Pinus Brutia Cone as a Binder in Brake Pads. EMS. 2018;2:115–118.
MLA	Sugözü, İlker ve Kürşat Kahya. “Investigation of the Effect on Tribological Properties of the Use of Pinus Brutia Cone As a Binder in Brake Pads”. European Mechanical Science, c. 2, sy. 4, 2018, ss. 115-8, doi:10.26701/ems.471131.
Vancouver	Sugözü İ, Kahya K. Investigation of the Effect on Tribological Properties of the use of Pinus Brutia Cone as a Binder in Brake Pads. EMS. 2018;2(4):115-8.