Öz
This paper presents design, implementation, and test stages of internet based inclinometer system. MEMS based two-axis inclinometer sensor, isolated data acquisition board, Raspberry Pi based microcomputer, and remote FTP server are the main parts of the system. Verification, noise characterization with Allan deviation, and temperature dependency measurements are conducted. Compensation and signal processing algorithms are performed in Google Colab. Long-term test on a high-rise building have revealed that the inclinometer system is suitable for structural health monitoring applications.
Anahtar Kelimeler
Analog-digital conversion Data Acquisition MEM/NEMS Sensors: Inertial Time-Domain Measurements
Destekleyen Kurum
Scientific Research Projects Coordination Unit of Istanbul University-Cerrahpasa
Proje Numarası
FBA-2017-24225.
Kaynakça
- Cai, J., Bu, G., Yang, C., Chen, Q., & Zuo, Z., “Calculation methods for inter-story drifts of building structures,” Advances in Structural Engineering, vol. 17, no. 5, pp. 735-745, 2014.
- M. Vágner and P. Beneš, “Start-up response improvement for a MEMS inclinometer,” in Proc. IEEE International Instrumentation and Measurement Technology Conference (I2MTC), Pisa, 2015, pp. 1363-1366.
- R. Schmidt, P. O'Leary, R. Ritt and M. Harker, “MEMS based inclinometers: Noise characteristics and suitable signal processing,” in Proc. IEEE International Instrumentation and Measurement Technology Conference (I2MTC), Turin, 2017, pp. 1-6.
- Ha, D., Park, H., Choi, S., and Kim, Y., “A wireless MEMS-based inclinometer sensor node for structural health monitoring”, Sensors, vol. 13, no. 12, pp. 16090-16104, Nov. 2013.
- Huang, H. W., Ran Xu, and Wei Zhang, “Comparative performance test of an inclinometer wireless smart sensor prototype for subway tunnel,” International Journal of Architecture, Engineering and Construction, vol. 2, no.1, pp. 25-34, Mar. 2013.
- Zhao, S., Li, Y., Zhang, E., Huang, P., and Wei, H., “Note: Differential amplified high-resolution tilt angle measurement system,” Review of Scientific Instruments, vol. 85, no. 9, pp. 096104, Sep. 2014.
- Hou, S., Zeng, C., Zhang, H., and Ou, J., “Monitoring interstory drift in buildings under seismic loading using MEMS inclinometers,” Construction and Building Materials, vol. 185, pp. 453-467, Jul. 2018.
- Andò, Bruno, Salvatore Baglio, and Antonio Pistorio, “A low cost multi-sensor system for investigating the structural response of buildings,” Annals of Geophysics, vol. 6, no. 2, pp. 217, Jan. 2018.
- Akpinar B., Gürkan K., Dindar A. A., Aykut N. O., Gülal E., “Development of national measurement system for structural health monitoring,” in Proc. International Congress on Advances in Civil Engineering (ACE 2016), Turkey, 2016, pp.1-4.
- Dindar A.A., Akpinar B., Gürkan K., Gülal E., Aykut N.O., “Development of low-cost hybrid measurement system,” in Proc. European Conference on Earthquake Engineering (16ECEE), Greece, 2018, pp. 1-8.
- Martino, Salvatore, Luca Lenti, and C. Bourdeau, “Composite mechanism of the Büyükçekmece (Turkey) landslide as conditioning factor for earthquake-induced mobility,” Geomorphology, vol. 308, pp. 64-77, Jan. 2018.
Öz
Proje Numarası
FBA-2017-24225.
Kaynakça
- Cai, J., Bu, G., Yang, C., Chen, Q., & Zuo, Z., “Calculation methods for inter-story drifts of building structures,” Advances in Structural Engineering, vol. 17, no. 5, pp. 735-745, 2014.
- M. Vágner and P. Beneš, “Start-up response improvement for a MEMS inclinometer,” in Proc. IEEE International Instrumentation and Measurement Technology Conference (I2MTC), Pisa, 2015, pp. 1363-1366.
- R. Schmidt, P. O'Leary, R. Ritt and M. Harker, “MEMS based inclinometers: Noise characteristics and suitable signal processing,” in Proc. IEEE International Instrumentation and Measurement Technology Conference (I2MTC), Turin, 2017, pp. 1-6.
- Ha, D., Park, H., Choi, S., and Kim, Y., “A wireless MEMS-based inclinometer sensor node for structural health monitoring”, Sensors, vol. 13, no. 12, pp. 16090-16104, Nov. 2013.
- Huang, H. W., Ran Xu, and Wei Zhang, “Comparative performance test of an inclinometer wireless smart sensor prototype for subway tunnel,” International Journal of Architecture, Engineering and Construction, vol. 2, no.1, pp. 25-34, Mar. 2013.
- Zhao, S., Li, Y., Zhang, E., Huang, P., and Wei, H., “Note: Differential amplified high-resolution tilt angle measurement system,” Review of Scientific Instruments, vol. 85, no. 9, pp. 096104, Sep. 2014.
- Hou, S., Zeng, C., Zhang, H., and Ou, J., “Monitoring interstory drift in buildings under seismic loading using MEMS inclinometers,” Construction and Building Materials, vol. 185, pp. 453-467, Jul. 2018.
- Andò, Bruno, Salvatore Baglio, and Antonio Pistorio, “A low cost multi-sensor system for investigating the structural response of buildings,” Annals of Geophysics, vol. 6, no. 2, pp. 217, Jan. 2018.
- Akpinar B., Gürkan K., Dindar A. A., Aykut N. O., Gülal E., “Development of national measurement system for structural health monitoring,” in Proc. International Congress on Advances in Civil Engineering (ACE 2016), Turkey, 2016, pp.1-4.
- Dindar A.A., Akpinar B., Gürkan K., Gülal E., Aykut N.O., “Development of low-cost hybrid measurement system,” in Proc. European Conference on Earthquake Engineering (16ECEE), Greece, 2018, pp. 1-8.
- Martino, Salvatore, Luca Lenti, and C. Bourdeau, “Composite mechanism of the Büyükçekmece (Turkey) landslide as conditioning factor for earthquake-induced mobility,” Geomorphology, vol. 308, pp. 64-77, Jan. 2018.
Ayrıntılar
| Birincil Dil | İngilizce |
|---|---|
| Konular | Elektrik Mühendisliği |
| Bölüm | Araştırma Makalesi |
| Yazarlar | |
| Proje Numarası | FBA-2017-24225. |
| Yayımlanma Tarihi | 30 Ekim 2021 |
| Yayımlandığı Sayı | Yıl 2021 Cilt: 9 Sayı: 4 |
Cited By
An ultrahigh performance laser driver based on novel composite topology enhanced Howland current Source
Review of Scientific Instruments
https://doi.org/10.1063/5.0106448
All articles published by BAJECE are licensed under the Creative Commons Attribution 4.0 International License. This permits anyone to copy, redistribute, remix, transmit and adapt the work provided the original work and source is appropriately cited.