Research Article
Year 2017,
Volume: 1 Issue: 2, 34 - 49, 28.12.2017
Abstract
ÖZET
Yüzey işleme, talaşlı imalatta
son işlem operasyonu olarak kullanılmakta ve uygulandıgı iş parçası
yüzeylerinde sertliğin artması, malzeme yorulmasına karşı dayanıklılık
ve aşınma direnci
gibi avantajları da
beraberinde getirmektedir. Yüzey işlemede kullanılan ilerleme, Yüzey işleme kuvveti, kullanılan aparat
gibi parametreler iş parçasının yüzey pürüzlülügünün iyileştirilmesi, yüzey sertliğindeki iyileşmeler,
malzemenin aşınma direncinin artması,
malzeme yüzeyinde çatlak
oluşturabilecek derinliklerin azaltılması vb. gibi hususları doğrudan
etkiler. Bu çalışmada dönel parçalar için
yüzey işleme yapabilecek bir aparat ile
talaşlı imalat işlemi
yapılmış olan yüzeyler
farklı parametreler kullanılarak yüzey
işlemeye tabi tutulmuş ve parça sertliği sonuçları elde edilmiştir. Deneysel
sonuçlar ölçüm cihazı ile elde edilmiştir. Elde edilen bu sonuçlar YSA (Yapay
Sinir Ağları) ile yorumlanmış ve bu yorumlar deneysel sonuçlarla
karşılaştırılmıştır.
Keywords
References
- 1. Basak, H., “The Design and Manufacture of Burnishing Equipment and Burnishing Process with AL 7075 T6 Material ” Journal of Mechanical Engineering, 53:12 (2007).
- 2. Hassan, A. D., Maqableh, A. M., “ The effects of initial burnishing parameters on non-ferrous components” Journal of Materials Processing Technology, 102 :115-121 (2000).
- 3. Khabeery, M. M., Axir, M. H., “Experimental techniques for studying the effects of milling roller-burnishing parameters on surface integrity” International Journal of Machine Tools & Manufacture, 41:1705–1719 (2001).
- 4. Axir, M. H., Ibrahim, A. A., “ Some surface characteristics due to center rest ball burnishing “Journal of Materials Processing Technology, 167:47–53 (2005).
- 5. János, K., József, D., András, S., György, F., “Mağnetic Aided Roller Burnishing Metal Parts” 7th International Conference on Deburring and Surface Finishing, 253–256 (2005).
- 6. Stodolnik, B.T.,” The influence of burnishing on the contact fatigue life of rings in Rolling bearings.”, Tribologia, XXVII, 6 (150):753-759 (1996).
- 7. Zhang, P., Lindemann, P., “Effect of roller burnishing on the high cycle fatigue performance of the high-strength wrought mağnesium alloy AZ80, ”Scripta Materialia, 130:81–89 (2005).
- 8. Sönmez F. “Haddeleme İşleminin Yüzey Pürüzlülüğü ve Yüzey Sertliğine Etkilerinin incelenmesi” Y.Lisans Tezi, Gazi Üniversitesi F.B.E., S:11, (2009). 9. Shiou, F-J.,Chen, C-H.,” Freeform surface finish of plastic injection mold by using ball-burnishing process”, Journal of Materials Processing Technology, 140:248–254 (2003).
- 10. Liviu, L., Sorin, N., Ioan, M.,“Effects of working parameters on surface finish inball-burnishing of hardened steels” Precision Engineering, 29:253–256 (2005).
- 11. T.G. Digges, Effect of Lathe Cutting Conditions on the Hardness of Carbon and Alloy Steels, Trans. ASME, 1932, 54 , p 49–57.
- 12. Hongyun, L., Lijiang, W., Chuang, Z., “Study on the aluminum alloy burnishing processing and the existence of the outstripping phonomenom,” Journal of Materials Processing Technology, 116:88-90 (2001).
- 13. Cirak B., “ Mathematically Modeling and Optimization by Artificial Neural Network of Surface Roughness in CNC Milling – A Case Study “, Journal of Materials Processing Technology, 72:385–391 (2016).
- 14. F. Gunnberg, M. Escursell, and M. Jacobson, The Influence of Cutting Parameters on Residual Stresses and Surface Topography During Hard Turning of 18MnCr5 Case Carburised Steel, J. Mater. Process.Technol., 2006, 174, p 82–90 .
- 15. Yu, X., Wang, L.,”Effect of various parameters on the surface roughness of an aluminium alloy burnished with a spherical surfaced polycrystalline diamond tool”, International Journal of Machine Tools & Manufacture, 39:459–469 (1999).
Year 2017,
Volume: 1 Issue: 2, 34 - 49, 28.12.2017
Abstract
References
- 1. Basak, H., “The Design and Manufacture of Burnishing Equipment and Burnishing Process with AL 7075 T6 Material ” Journal of Mechanical Engineering, 53:12 (2007).
- 2. Hassan, A. D., Maqableh, A. M., “ The effects of initial burnishing parameters on non-ferrous components” Journal of Materials Processing Technology, 102 :115-121 (2000).
- 3. Khabeery, M. M., Axir, M. H., “Experimental techniques for studying the effects of milling roller-burnishing parameters on surface integrity” International Journal of Machine Tools & Manufacture, 41:1705–1719 (2001).
- 4. Axir, M. H., Ibrahim, A. A., “ Some surface characteristics due to center rest ball burnishing “Journal of Materials Processing Technology, 167:47–53 (2005).
- 5. János, K., József, D., András, S., György, F., “Mağnetic Aided Roller Burnishing Metal Parts” 7th International Conference on Deburring and Surface Finishing, 253–256 (2005).
- 6. Stodolnik, B.T.,” The influence of burnishing on the contact fatigue life of rings in Rolling bearings.”, Tribologia, XXVII, 6 (150):753-759 (1996).
- 7. Zhang, P., Lindemann, P., “Effect of roller burnishing on the high cycle fatigue performance of the high-strength wrought mağnesium alloy AZ80, ”Scripta Materialia, 130:81–89 (2005).
- 8. Sönmez F. “Haddeleme İşleminin Yüzey Pürüzlülüğü ve Yüzey Sertliğine Etkilerinin incelenmesi” Y.Lisans Tezi, Gazi Üniversitesi F.B.E., S:11, (2009). 9. Shiou, F-J.,Chen, C-H.,” Freeform surface finish of plastic injection mold by using ball-burnishing process”, Journal of Materials Processing Technology, 140:248–254 (2003).
- 10. Liviu, L., Sorin, N., Ioan, M.,“Effects of working parameters on surface finish inball-burnishing of hardened steels” Precision Engineering, 29:253–256 (2005).
- 11. T.G. Digges, Effect of Lathe Cutting Conditions on the Hardness of Carbon and Alloy Steels, Trans. ASME, 1932, 54 , p 49–57.
- 12. Hongyun, L., Lijiang, W., Chuang, Z., “Study on the aluminum alloy burnishing processing and the existence of the outstripping phonomenom,” Journal of Materials Processing Technology, 116:88-90 (2001).
- 13. Cirak B., “ Mathematically Modeling and Optimization by Artificial Neural Network of Surface Roughness in CNC Milling – A Case Study “, Journal of Materials Processing Technology, 72:385–391 (2016).
- 14. F. Gunnberg, M. Escursell, and M. Jacobson, The Influence of Cutting Parameters on Residual Stresses and Surface Topography During Hard Turning of 18MnCr5 Case Carburised Steel, J. Mater. Process.Technol., 2006, 174, p 82–90 .
- 15. Yu, X., Wang, L.,”Effect of various parameters on the surface roughness of an aluminium alloy burnished with a spherical surfaced polycrystalline diamond tool”, International Journal of Machine Tools & Manufacture, 39:459–469 (1999).
There are 14 citations in total.
Details
| Subjects | Mechanical Engineering |
|---|---|
| Journal Section | Genel |
| Authors | |
| Publication Date | December 28, 2017 |
| Published in Issue | Year 2017 Volume: 1 Issue: 2 |